| Job Position |
Responsibilities |
Required Qualifications |
Required Experience |
Other Skills |
| In charge of Drilling machines (1) |
- Conduct regular inspections to identify faulty equipment and perform repairs.
- Carry out diagnosis of all drilling machines periodically and recommend suitable solutions to ensure operation readiness of Drilling Machine.
- Identify defective parts and give recommendations to supervisors on repair requirements and on time
- Supervise other machine operators
|
- At least advanced diploma(A1) in mechanical, electronic engineering or other related field with vast knowledge in drilling
|
- At least experience of 5 years and above
|
Should be fluent in English or French to be able to read, understand and interpret operational manuals of production drilling machines |
| Quantity Surveyors
(7) |
- Coordinating measurements and valuations of works executed on projects.
- Supervising a team of Project Quantity surveyors and ensuring they deliver the required quality of works.
- Monitoring the invoicing process and advise some alternatives methodologies of work for better project cash flow
- Participation in daily project activities by performing the analysis of the implementation of the approved budget.
- Daily report of value work done vis-à-vis expenses to insure and control the productivity and Company margin
- Be permanent on the assigned project if any reason to be out of the project for some time should be Communicated to the Project Manager
|
Bachelor’s Degree in Quantity Surveying |
Minimum 5 years of relevant experience in Construction or Maintenance project and 2simillar projects as quantity Surveyor/Measurement Engineer |
Proficient computer skills , including Microsoft office suite(Word ,excel, and power point |
| Land Surveyors
(4) |
- Responsible of all works related to topography of the project (before during and after)
- Any activity must be aligned with the project work schedule and in agreement with the Project management
- Responsible of the Topographic project equipment by communicating the head office for any issue related to either Maintenance or calibration
- Be permanent on the assigned project if any reason to be out of the project for some time should be communicated to the Project Manager.
|
At least A2in Public Works or Construction |
3years of experience Land Surveying |
– |
| Designer(1) |
- Responsible of all design works by assuring quality of the product
- Serve the project request by making sure that they are served with no delay
- Following the schedule of work from projects and maintain good communication with end user (Projects)
- Participation of the Projects activities and meetings for technical advice or issues when required
- Follow up of any design request up to the approval stage either by the Client or Project Supervisor
- Filling of the approved design for all projects
|
- Bachelor’s degree in civil engineering, topography or related field preferred
|
- 3Years of working experience
|
Demonstration of experience and knowledge in :
-Auto card (covaidis ,civil 3D)
-Piste
-Arch card, and other Civil Engineering Software
Have a good Knowledge in road geometrical and hydraulic structures design |
| Motor Electrical
Technician
(1) |
- Be responsible for maintenance and repair operations of the company
- Liaise with Fleet supervisor to plan preventive maintenance programs
- Establish labor and material requirement for the repair of defective Vehicles and equipment’s
- Maintain computerized records of their inventory and technical data
- Keep computerized records of repair history of vehicles and equipment’s
- Prepare and recommend a list of spare parts and corresponding technical specifications to be bought and verify deliverables
|
- Ordinary level in auto mobile Electrical mechanics
|
|
– |
| Welder(1) |
- Welding all required metallic tools, equipment and Vehicles
- Ensuring required welding tools are safely kept and maintained
- Be responsible for maintenance and repair operations of the company
- Prepare and recommend a list of spare parts and corresponding technical specifications to be bought and verify deliverables
|
- ordinary level in auto mobile mechanics
|
- 6 years hands-on experience
|
– |
| Operator of Motor grader(1) |
- Drive company Machine when authorized to take off on official duty
- Make daily check on machine (oil, battery, brakes, tires) take note to report immediately any required service, repair or adjust to ensure that the Machine are kept in a good running condition.
- Ensure that machine is kept in safe and good conditions
- Log all official trips, daily mileage, fuel consumption and ensure that the vehicle is serviced exactly when service is due
- Ensure that in case of an accident , a report is filed immediately and steps required by traffic police and insurance company are strictly followed
- Follow all rules and regulations in relation to the government traffic laws and fleet section regulations.
- Perform other duties as may be assigned by the fleet Supervisor
|
|
- 5years hands-on Experience
|
– |
| Backhoe loader Operator (1) |
- Drive company Machine when authorized to take off on official duty
- Make daily check on machine (oil, battery, brakes, tires) take note to report immediately any required service, repair or adjust to ensure that the Machine are kept in a good running condition.
- Ensure that machine is kept in a safe and good conditions
- Log all official trips, daily mileage, fuel consumption and ensure that the vehicle is serviced exactly when service is due
- Ensure that in case of an accident , a report is filed immediately and steps required by traffic police and insurance company are strictly followed
- Follow all rules and regulations in relation to the government traffic laws and fleet section regulations.
- Perform other duties as may be assigned by the fleet Supervisor
|
|
- 4yearshands-on Experience
|
– |
| Electrical Engineer (1 |
- To develop design, plans, control and monitoring systems required for the project.
- To implement and supervise works and systems for the various electrical works
- To implement and manage safety and permit to work systems when carrying out works on the electrical sites
- To produce daily, weekly and monthly reports on the project progress as per the company policy and on any other works carried out on electrical site
- The Electrical Engineer will supervise an electrical site engineer, a team of electrical technicians, skilled and unskilled labor
- Designs and develops databases to support project activities;
- Follow up with the implementing partners and sub-contractors for progress report, submission of reports and other related information material
- Communication with project partners and stakeholders for project activities and to ensure timely organization and facilitation of activities relating to project implementation;
- Any other duties that may be requested by his supervisor
|
- A Bachelor’s Degree in Electrical Engineering and a registered member of a recognized professional engineering society.
|
- Must have at least 4 to 5 years of experiences and capabilities in electrical works supervision in the execution of transmission lines and substations projects of more than 110kV with associated switchgears.
- The candidate must also have the experiences in the testing of protection systems for the equipment and the network.
|
– |
| Electrical Site Engineer (1) |
- Provides a high level of coordination and organizational support to Project Manager; and technical guidance to teams under his supervision
- Manages the project ‘s resources including logistics and teams for project execution
- Assists with design and development of project works and reports;
- Assists in project implementation with preparation of budgets of different activities according needs;
- Prepares requests for purchases and procurements of materials, goods and equipment according to the projects’ needs and the corresponding administrative and/or forwarding procedures;
- Prepares supporting documents for invoices for executed works of project;
- Conducts other activities deemed as necessary within the project framework
|
- A Bachelor’s Degree in Electrical Engineering and a registered member of a recognized professional engineering society.
|
• Must have at least 4 to 5 years of experiences and capabilities in electrical works supervision in the execution of transmission lines and substations projects of more than 110kV with associated switchgears
- The candidate must also have the experiences in the testing of protection systems for the equipment and the network.
|
– |
| Truck drivers(5) |
- Drive company Vehicle when authorized to take off on official duty
- Make daily check on vehicle (oil, battery, brakes, tires) take note to report immediately any required service, repair or adjust to ensure that the vehicle are kept in a good running condition.
- Ensure that vehicle is kept in a safe and good conditions
- Log all official trips, daily mileage, fuel consumption and ensure that the vehicle is serviced exactly when service is due
- Ensure that in case of an accident , a report is filed immediately and steps required by traffic police and insurance company are strictly followed
- Follow all rules and regulations in relation to the government traffic laws and fleet section regulations.
- Perform other duties as may be assigned by the fleet Supervisor
|
|
- 3 Years hands-on Experience
|
|
| Accounts Assistant for Site (2) |
- Manage site stores including receiving stock items, safe custody and issuing stock items
- Ensure all movements of inventory items are dully approved and keep a record of adequate supporting documentation
- Maintain a record of all inventory item transactions
- Ensure safe custody and account for all inventory items under their custody
- Provide regular reports to supervisor of Inventory balances
- Manage site petty cash as per company policy and maintain supporting documents for petty cash spending
- Maintain casual workers register and prepare periodic casual payroll
|
- A0 in accounting or other related field
|
- Must have at least 2 years of experiences
|
– computer skills (word, Excel, power point |
